|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
08-26-2007, 03:38 AM
|
|||
|
|||
|
After fixing 99 WindStat Power Window (Driver Side)
All of sudden, the power window on the driver's side did not work. The fuse the window motor was OK and so the door panel was removed. The voltage at the two pins connected to the motor showed no voltage when down-SWT was pressed, but did 12 Volts with up-SWT depressed. So I guessed the swich was bad. Since the passenger side is working fine, I got some idea from the passenger side switch. I did continuity check on the driver's side SWT and found that the switch was not working only when down-side was depressed.
I got some hint from this site that the switch may be just supply 12 V to the motor with different polarity. Then the switch may be easily fixed. I took apart the switch and found that some dusk can make it bad. I cleaned the contact points (three for driver side, two for the pass-side). After this the switch unit came back on business!!! Auto parts dealers may hate me??? 
|
|
#2
08-26-2007, 07:44 PM
|
||||
|
||||
|
Re: After fixing 99 WindStat Power Window (Driver Side)
Jeff
Way to go! I too take any thing apart to fix it! Most of the time they go back together and work.... Regards Dan
__________________
******************************************* Wiswind's Windstar repair pics http://community.webshots.com/album/201931518cScpNK Photos of my repairs: http://dansautopictures.shutterfly.com/ Check this out:http://threewheelmotorcyclemetro.shutterfly.co A must read about problems Windstars have: http://www.automotiveforums.com/vbul...d.php?t=672854 95 Windstar 240,000+ 98 Windstar 136,000+ 09-25-2008. 85 Dodge 1 Ton Snow mover gas hog 91 Mazda Protege free beater SW MN
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
