|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
well i finally cranked my engine and i did it without the plugs in and some water came out off the #7 cylinder and im praying its just a leaky intake gasket but im not SURE so where should i start and whats the most common cause of water gettin into a cylinder? also i read that you should use a good amount of gasket maker on the intake just for this reason and i used some but i didnt know i should put any more than wat seemed reasonable so if someone can help me out THANK YOU
|
|
#2
|
|||
|
|||
|
Re: :( water in my cylinder
well... if you think you have an intake problem. check your oil make sure there is no water in there and then go ahead and do a coolant test. and if everything checks good then you could have just got water in the carb and ur number seven intake was open.
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|