67 galaxie problems

[benswolf_1]

Ok,

I have a 2dr 67 galaxie 500 with a 390. I just had the original 2v carb and intake swapped for a 4b edlebrock and high pro intake manifold. He re-jetted the carb and tweaked it as good as he could. He said it was hard to get it perfect because it is so cold here right now. Anyways when i get on the gas hard i here a click and there is a delay like im not even on the gas then it reacts and takes off-my problem is that i am going to race it this spring/summer and that delay will kill me-so what might be the problem? Thanks!
-Ben

[TommySS]

Sounds like an accelerator pump problem

[deske]

hi i have to change my timebelt for a 1.9tdi galaxy year 2000 anyone got a manual for this???

[MagicRat]

Originally Posted by deske

hi i have to change my timebelt for a 1.9tdi galaxy year 2000 anyone got a manual for this???

Stat a new thread on this subject and you will get a better response.

[hxgaser]

How big is your carb? Is your motor built? Although 390 is a big block, stock motor ususlly works around 500 to 600 cfm range at the most. You might be flooding it. Try it with smaller jets.

[Aremy Griese]

if the cam is bad, it'll make a snapping sound when you give er. but if the cam is good , then the guy who did your carb f-ed up. cause that engine can handle well over a 600cfm, even stock. other then that , all i can say is check your timming again.

[dakota9991]

i have the same problem i have 289 4 v [600cmf] with duel piont dist .with mechanical advance it has a nice cam an headers on take off it,s a dog but once rolling it shots off it also has a stock coil iam lost also the car runs great if you drive it normal maybe some one can solve both our problems