a/c not very cold!!

[abaird]

Originally Posted by jazyoung

removed the motor and manually worked the door seemed to be moving too max both directions. checked the motor also and the door was moving as much as the motor. no gears stripped within the case. also had the pressures rechecked low side @ 33, high @ about 220, ambient temp about 94 degrees.

Is this with the engine running? What are the static pressures? If you had a shop charge it for you then take it back and let them deal with it. Static pressure on low side should be 100+ psi when it is 94 outside. If not then you are low on refridgerant.

[jazyoung]

these are engine running pressures. No shop , buddy has a set of guages and some r-134a. He's a HVAC guy, but doesn't do a lot with automotive. Guess I'm headed to the shop!