Code 1345 Need some help guys!

[Jeremy-WI]

96 K1500
On the ez-scan in operational data, pid 64 says cam retard.
Software version is 4.02 K2.01

[MT-2500]

Originally Posted by Jeremy-WI

96 K1500
On the ez-scan in operational data, pid 64 says cam retard.
Software version is 4.02 K2.01

You need to reset the dist.

Set the cam retard as close to - or + 0 degrees as you can get it.

If your scanner will not read cam retard you will need to find one that does to set it.

Any other codes?