|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
05-15-2007, 07:42 PM
|
||||
|
||||
|
Blower Motor Replacement
Does anyone have pin point directions on the replacement of the Blower Motor on an '87 GM? Is it done from under the hood or from the inside, past the glove box? MB
|
|
#2
05-16-2007, 12:32 PM
|
||||
|
||||
|
Re: Blower Motor Replacement
You replace the motor from under the hood. Just remove or move any brackets and wires that may be in the way. A couple of the little bolts are hard to get to, but if you take your time, you will be OK. A 1/4 ratchet, extension and socket will help. Also if you have a little sticky stuff to put in the socket to help hold the little screws it is handy. Go to this page and it has instructions and it is free.
__________________
Being way2old is why I need help from younger minds The sooner you fall behind the more time you'll have to catch up.  HEY Y'ALL--READ THIS Here are some of our old vehicles for sale. 
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
