|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Performance Talk about anything having to do with performance & mods. |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
04-08-2007, 12:59 PM
|
|||
|
|||
|
7M-GE to GTE wiring...help!
I need the help of someone who's swapped a GE for a GTE. I've rebuilt the GTE bottom end and broke it in as an NA. I've got my turbo hooked up and I'm getting ready to swap the manifolds, but I've run into a problem. When swapping the wiring harness, I noticed the round yellow plug on the gte harness won't go to the factory part on the ge car... if that makes any sense. I think the part is called a solenoid resistor (on the driver's side mounted near the strut mount). Also, the connector to the solenoid resistor had a wire soldered piggy-back style onto it, but the wire leads to nothing. What solenoid(s) does this thing control? Are there any other compatability things I should know about?
|
|
#2
04-09-2007, 08:59 PM
|
||||
|
||||
|
Re: 7M-GE to GTE wiring...help!
Which harnesses did you swap? Years please...
__________________
 05 Srt4 Agp 3147 w/supporting mods  97 Mx-5 T28, hks man, ebay int/pipes, rfl bov, xtd 6 puck, 3" magnaflow, msd timing box,
|
|
#3
04-09-2007, 09:31 PM
|
||||
|
||||
|
Re: 7M-GE to GTE wiring...help!
You need to swap the GTE complete with ECU and harness.
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
