|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
02-09-2007, 10:04 PM
|
||||
|
||||
|
Anyone have a link to a 4L60E Rebuild Manual?
I need a manual for a 4L60E rebuild, preferably an online manual. once again thank you all for the help so far.
|
|
#2
02-10-2007, 05:40 PM
|
||||
|
||||
|
Re: Anyone have a link to a 4L60E Rebuild Manual?
i bought the 700R4 rebuild video from www.transmissionhead.com about 1.5 years ago. i rebuilt it myself, following the video, and it was a lot easier than tryin to figure it out otherwise. the 700R4 is the exact same as the 4l60E except there are a few more wires in the 4L60E. Mechanically its the same. I would recommend you buy that video.
I had my tranny guy look at it after I rebuilt it (I didnt smooth out the throttle valve enough, with sandpaper, and so it got stuck. but I wasnt sure what the problem was at the time. simple fix.) He unstuck it for a very minimal price and repeatedly complimented me on how well the tranny was put together. He was impressed.
__________________
 90 Camaro RS V6 - swapped to V8 -350 block, GM Vortec L31 Heads, Edelbrock Performer RPM Vortec intake, 750cfm carb, CompCams XE268 Camshaft ESTIMATED 360-420 hp 380-430lb/ft torque 
|
|
#3
02-11-2007, 03:28 PM
|
||||
|
||||
|
Re: Anyone have a link to a 4L60E Rebuild Manual?
Thank You I will check that out.
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
