|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
01-21-2007, 06:25 PM
|
|||
|
|||
|
Brake light on
I replaced the front rotors and pads on my 2000 caravan yesterday. So I don't know why the idiot light is on. I also bled the brakes, so I know the fluid level is ok. Any thoughts?
PS: Tried some good slotted rotors made in Germany and better pads. Supprisingly, it did not give the improvement I thought it would. 
|
|
#3
01-22-2007, 01:28 AM
|
||||
|
||||
|
Re: Brake light on
You deserve the honesty award for the month! Thanks.
__________________
**We took the time to answer your post. Please give us some time and post the fix. It will help hundreds. **Follow prescribed safety practices before attempting any procedures. Doubts? Consult a maintenance manual. 07 Fusion / 06 RAV4 / 06 Accord / 96 Gr Caravan
|
|
#4
01-22-2007, 11:48 AM
|
|||
|
|||
|
Re: Brake light on
You may have got lucky. There's a warning in my Chilton manual that you have to use a scanner tool when bleeding ABS brakes. I suspect it would set a code or turn or the light if you don't.
|
|
#5
01-22-2007, 11:59 AM
|
||||
|
||||
|
Re: Brake light on
Rawtorque - Think that applies if you change an ABS component, suck the master cylinder dry or change the master cylinder. Bleeding air out of a caliper shouldn't be a problem without a scanner. I'm thinking that's because any air in the system from disconnecting a caliper is too far downstream from the MC or an ABS component to effect the ABS. Cheers!
__________________
**We took the time to answer your post. Please give us some time and post the fix. It will help hundreds. **Follow prescribed safety practices before attempting any procedures. Doubts? Consult a maintenance manual. 07 Fusion / 06 RAV4 / 06 Accord / 96 Gr Caravan
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
