|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
01-15-2007, 09:27 PM
|
|||
|
|||
|
98 rodeo timing questions
my friend has the 2.2. had bent valves after the timing belt came off. replaced both idler pulleys and bought a remanufactured head. the head came with both camshafts new. looking at the front of the engine. which camshaft has the exhaust pully and which has the intake pulley? he had it running but said it was rough. i suspect the the pulleys are incorrect, bad gas (been sitting eight months), plugged injector, or 180* out of time. BTW, all new gaskets were installed and everytihng torqued to specs. can anyone help here? and even help on how to set the timing? (i know #1 cylinder TDC) but whats the easiest (read cheapest) way to find #1 on compression stroke? please help!
|
|
#2
01-16-2007, 07:33 PM
|
||||
|
||||
|
Re: 98 rodeo timing questions
 the exhaust cam is usually on the side the exhaust manifold is onthe intake cam is usually on the side the intake manifold is on
|
|
#3
01-16-2007, 07:42 PM
|
|||
|
|||
|
Re: 98 rodeo timing questions
that's what i thoght but wanted to be sure first. he has $600.00 invested in a new head and gaskets so i didn't want to take any chances. thanks for the reply. very much appreceiated.
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
