starting problems cranks wont start, i spimpithise

[Thorn71]

Rather than bring the old thread up i originally posted months ago i will shorten this one. Suddenly my GTP would not start after moving it for the drive way. turned the key to on no fuel pump cycle. Got my timing light to quickly see if the plug were firing they were. Replaced fuel pump first mistake did not check to see if i had power to the pump i did not. Bought elmscan5 tool to scan pcm it would not read it message was protocol not recognised. it works fine on my brother 2000 gt. Now i guess again and got lucky reprogrammed pcm which i wanted anyhow. Runs great and what a different.
Thanks GTP DAD and BNAYLOR for your devotion to the content of this site! ie 2 speed fuel pump speed control.

[BNaylor]

Thanks for the kind words and feedback. We try hard on content but the forum is only as good as active participation from our members and sharing their experiences. Good luck and Happy New Year!