B18C1 Engine Swap ECU Question

[Kango]

Is it possible to have a B18C1 in a 95 Integra RS with the stock ECU. Or would it have to have a JDM P72 ECU?

Where is the ECU located for me to check?

Thanks

[Schister66]

You're just going to need any OBD2 GSR ECU...the difference between that ECU and your stock one is that the P72 is going to have VTEC enabled as well as the the IAB function on the intake manifold. If you want a P72, i have an extra one for sale. Also the ECU is located in the passanger side kick panel

[CivicSpoon]

He'll need the OBD1 ecu, or else he'll have to buy the OBD1 to OBD2 conversion harness to be able to use an OBD2 ecu.

[Schister66]

oh yeah....95 is OBD1 isn't it? Well you're going to need the OBD1 ECU then....you could find a P28 or OBD1 P72....i have a P28, but i think you'd need it chipped and socketed for that application

[superbluecivicsi]

i have an obd1 p72. make an offer

[Schister66]

oooOOOooohhhh those are spendy.....lol

[Pavlo]

Run a chipped P28, then you'll have potential for more tunning later, if you boost it perhaps.

[Pavlo]

Run a chipped P28, then you'll have potential for more tunning later, if you boost it perhaps.

[CivicSpoon]

Now, with almost any ecu, you can have it chipped and tuned. Even Hondata chips jdm ecus. but most will chip p28's, p72's, p06's, etc.