help with a build

[hazza 171]

ok i have built a install witch can take 3 12 " subs i have got 3 12" mutant THE SPECS ARE AS FOLLOWS;

50,OZ MAGNET,

STEEL BASKET,

MAX POWER 700 WATTS,

RMS POWER 200 WATTS,

FREQUENCY RESPONSE 30,HZ-800HZ

SENSITIVITY 90 dB.

and i was wondering what would i need to power these what amp/amps would i need and how would i birdge them just a simple bridgin kit ?? and would running a power cap or 2 be worth while . thanks for help hazza

[PaulD]

buy a D class amp that is stable 1 ohm and can put out at least 600 watts RMS, wire all 3 sub in parrallel (all the + terminals together and all the - terminals together). Should give you a 1.33 ohm load. You will need to know what size box the speaker manufacturer recomends to get the most out of them. Caps do NOTHING for SPL (bass music), save your money for heavier power cables or amp.

[hazza 171]

thanks m8 what would you say is a good class D amp i heard sony are s**t but i heard gto are not bad what would you say is a good amp or what would you run for these speakers ??

would a JBL GTO1201.1 1200 Watt Class D Subwoofer Amplifier
or the JBL GTO601.1 600 Watt Class D Subwoofer Amplifier
or JL AUDIO Mono 1400 WATT CLASS D Car Amplifier amp Model Number E1400D

[PaulD]

I would think any of those amps would be good

[hazza 171]

thanks alot m8 you have been a great help ill post a few picture when its complete thanks
http://img140.imageshack.us/my.php?image=boot4hj4.jpg
http://img214.imageshack.us/my.php?image=boot2xo3.jpg

[hazza 171]

ahh been let down with a few amps wondering if this on would do the job ..

The stunning TL-1022 Class D digital monoblock subwoofer amplifier delivers an enormous 4,000w max power (1,500w RMS) at 1 ohm, 950w RMS at 2 ohm and 600w RMS at 4 ohm

thanks hazza

[PaulD]

that's a lot of power

[92-silverado7.4]

try the 750watt rms, Hifonics Titan, Ive seen it work with three kicker cvrs, so Im guessing it'll be more than enough for your subs...its at a pretty good price too.