|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
10-30-2006, 11:03 PM
|
|||
|
|||
|
1993 Lumina APV not firing
I have a 1993 Lumina APV that isn't firing any spark plugs. It actually hasn't been started in about 3 years. I've jumped the battery and it cranks fine and I just put new plugs and wires in but none of the spark plugs are firing. This is also not a result of it sitting for so long, it sat for so long because of the firing problem and was just never fixed. What could it be?
|
|
#2
10-31-2006, 06:29 AM
|
||||
|
||||
|
Re: 1993 Lumina APV not firing
What engine do you have?....
Most probably crank position sensor, a common problem, specially at that age. Problem it is hard to get if a 3800. www.avigex.ca/xport/ckps.jpg www.avigex.ca/xport/ckpphoto.jpg www.avigex.ca/xport/ckpsremoval.jpg www.avigex.ca/xport/ckpulley.jpg www.avigex.ca/xport/cksphoto.jpg Other possibility is the ignition module. Just changed mine a few months ago. www.avigex.ca/xport/d1977a.jpg Much easier if a 3.1 though: it is all in and around the distributor. reading the codes can give some indication, although not always critical of the actual problem. IN any case, use this: www.avigex.ca/xport/readingcodes.jpg
__________________
'93 Ponty Transport 3.8; 2011 SUzuki SX4 AWD (wife's) ; 2015 Sorento 2.4 AWD 1928 Graham Paige Model 629 I don't believe in miracles. Last edited by LMP; 10-31-2006 at 07:30 AM.
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
