90 deville motor mounts

[devilles]

any tips on replacing front mounts on a 90 deville? I need both fronts replaced. any help is appreciated.

[caddydaddy]

The dogbone mount is very easy. The lower right mount is tough. The easiest way to do it is to remove the nuts holding the lower part of the mount to the crossmember. Then jack the engine up a bit to get the bolts to pull through the crossmember. The easiest way to get to the top nuts on the mount is by a long extension from above the engine. Once the nuts are removed, it may take a bit of contorting to get it out, but it will come out.