|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Problem Diagnosis Got a problem you can't fix? Post here and one of our members will answer as soon as possible. |
![]() |
Show Printable Version |
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
|
|||
|
|||
|
Im driving a 96 4dr 4x4 6cyl. and for awhile now i've noticed it shifts a little harder than usual from drive to reverse when parking. I almost never use 4wheel and my mechanic says the U joints are fine. Tranny fluid is good to. Also when leaving for work in the morning i notice that it sounds like its going faster than it is and taking a bit to shift into second until it warms up a bit. Just had a new computer and ignition switch put in last year. I have found lots of info here on the second problem but any input on the reverse thing would be helpful....thanx
|
|
#2
|
||||
|
||||
|
Re: 96 blazer 4x4 shifting hard from D to R..
My 94' has the same issue,
I hear a thump noise when I shift between D & R, nothing loud or really noticable, But I hear it....
__________________
94 Blazer S-10 1st Gen-4wd 4.3L W V6 Faster and louder than stock, but nonetheless a blazer! |
|
#3
|
||||
|
||||
|
Re: 96 blazer 4x4 shifting hard from D to R..
Just somthing you might want to check.... My 98 Blazer was running a little rough so I unplugged my MAF... When I did this I noticed shifting from D to R was hard and regular shifting was a little off... Plugged my MAF back in and it shifted fine....
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|