|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
09-17-2006, 08:31 PM
|
|||
|
|||
2.8 swap
i was wondering why the camaro 2.8 makes more horsepower and torque compared to the s10 2.8. What parts make the more power (cam, heads, and intake).
|
|
#2
09-20-2006, 03:54 PM
|
|||
|
|||
|
Re: 2.8 swap
i took the heads off the 2,8 i just bought and it says .75mm I know that that means its been bored out but what is it in inches.
|
|
#3
09-20-2006, 08:21 PM
|
||||
|
||||
|
Re: 2.8 swap
when trucks and cars have the same motor but ones makes a little more power it is because if usally the heads, and intake,or intake manifold.
__________________
95 Z71 Silverado 4x4 ext. cab Mods- Flowmaster Exhaust,Intake
|
|
#4
09-20-2006, 08:22 PM
|
||||
|
||||
|
Re: 2.8 swap
the 2.8 is nothing to be trying to make power with, they have no balls what so ever.
__________________
95 Z71 Silverado 4x4 ext. cab Mods- Flowmaster Exhaust,Intake
|
|
#5
09-22-2006, 12:49 PM
|
|||
|
|||
|
Re: 2.8 swap
im not trying to make power i blew up my 2.8 and we cant find any multiports out here so i bought an s10 2.8 and changing the intake, heads, and cam from the blown camaro 2.8 to the s10 2.8. cause when i was on work experiance at a local shop we checked out the specs and the camaro made, i think close to 20 hp and 20 tq more then the s10. and when i took the heads off the s10 motor the pistons were stamped .75mm i didnt bore it over the guy who had it before did it.
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
