|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
08-03-2006, 04:32 PM
|
||||
|
||||
|
front bearings
I am being told that the only way you can get the bearings for this vehicle is to buy the whole hub assembly, Is this true? if not were can I get the bearings? Orielys will not sell just the bearings If it is true...did I just buy a lemon?
__________________
08 Equinox LT 
|
|
#2
08-03-2006, 06:00 PM
|
||||
|
||||
|
Re: front bearings
Quote:
Yes most front wheel drives you have to buy the hole thing. But look on the bright side you get a new ABS wheel speed sensor with most of them. MT
__________________
Remember proper testing gives us the answer to many problems. MT
|
|
#3
08-03-2006, 06:55 PM
|
||||
|
||||
|
Re: front bearings
Look at the bright side?....hehe 234.00 compaired to around 25.00 for just the bearings.....Im not one for fixing things that are not broken. but...ok
oh yea...anyone have the torque specs for this hub assembly? I called around down here and i couldnt find anyone that had a manual for this montana. Ill have to order it, but I need to get this done before then. Thanks ps. anyone know were i can find a service manual for this van? I have tried haynes and chilton websites and it seems they dont carry one....hmmmm
__________________
08 Equinox LT Last edited by nickledimed; 08-03-2006 at 08:53 PM.
|
|
#4
08-03-2006, 09:19 PM
|
||||
|
||||
|
Re: front bearings
Quote:
http://www.alldata.com/products/diy/index.html Axel shaft nut = Aztek is 192 ft lbs and just front whell drive van is 119 ft lbs. Hub and bearing bolts is 96 ft lbs And lug nuts is 100 ft lbs. MT
__________________
Remember proper testing gives us the answer to many problems. MT
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
