Eibach prokit on acura integra?

[AznBlitz]

Hey

I am planning to lower my car using the eibach pro kit and the koni sports but ive heard from many people that say that these springs tend to lower the rear more then the front or that they sag and create an uneven ride. Can anybody comment on this? I am going to be putting these parts into my 2000 acura integra GS

Thanks

[Marasmus]

I've looked into the Pro-kit heavily on the late integras. They lower the front 1.3 inches and the rear 1.3 inches for the Integra (LS,GS,GS-R).

If you consider how off-balance the stock ride is (the back tends to be noticeably higher up than the front), it couldn't get a whole lot worse. I've also never heard a single bad word about the Eibach Pro-kits. Nothing but praise.

[AznBlitz]

Hey

Thanks for replying to the thread. But i dont know why to me it seems that for the later year integras that the fronts seem a tad higher then the rears thats why when you lowered it with prokits it seems like the front is a bit higher then the rears??

[Marasmus]

On my integra (which still has all-stock suspension), the front-back wheel gap is fairly even, but slightly lower in the front. This is the case even with my speaker box and amps in the back of the car. You can sort-of see it in these pictures, though neither are a really great view of the wheel gap.

http://marasmus.vectorstar.net/rice/images/left.jpg
http://marasmus.vectorstar.net/rice/images/right.jpg