ground effects

[89iroctpi5.7]

Ive took out all the screws I see how do these things come off. The center is loose now but the ends are still attached somehow.Im trying to repaint my gound effects and would rather pull them off if I COULD. THANKS

[viperh]

Originally Posted by 89iroctpi5.7

Ive took out all the screws I see how do these things come off. The center is loose now but the ends are still attached somehow.Im trying to repaint my gound effects and would rather pull them off if I COULD. THANKS

Holy triple post batman. Um.. ground effect are connected usually by snaps, screws and/or double sided sticky stuff. If you are sure you have all the screws out (including inside the wheel wells) it just takes a good yank for the snaps and slow carefull pulling for the stickystuff (if you have that).

[Rally Sport]

There should be a silver bar that is holding it from the body to the ground effects on the front and back you have to unhook it from that..

It'll be a fight though, it doesnt go easy but im sure you wont break your ground effects unless you bend the crap out of it.