 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
06-11-2006, 01:34 AM
|
#1 | |
|
AF Regular
Join Date: Jan 2004
Location: Charleston, West Virginia
Posts: 319
Thanks: 0
Thanked 8 Times in 6 Posts
|
Problem with 700R4 Tranny
I've got an 83 S10 2 wheel drive with the 700R4. The tranny won't upshift unless I over rev the engine and back off the gas. The TV cable has been replaced, and, the filter and fluid have been changed. There was no debris in the pan when I pulled it to indicate any damage to the tranny has occured. The tranny has about 50K miles on it. Any experts out there on this tranny who can advise me on a fix??
|
|
|
|
|
06-11-2006, 02:09 AM
|
#2 | |
|
AF Newbie
 Join Date: Jul 2005
Location: Monroeville, Pennsylvania
Posts: 51
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Problem with 700R4 Tranny
I'm not wanting to give you the bad news but I am quite afraid to say my experience with the 700R4 transmission in that case has typically ended up with a bad band or two in the transmission.
I had a bad run with those trannies a while ago. I do have a transmission sitting that should be good if you would need it, I nolonger need it as my S10's all are now 4x4 with the standard tranny.
__________________
http://clanmage.net/~techyon/Techs_Garage/ 1984 GMC S15 Soon to be a SS-10 "my own creation" 383 Stroker, World Products Heads, 850cfm double pumper 1984 GMC S15 1987 Jeep Cherokee Pioneer 1989 Chevy S10 4.3ltr with 10" of lift "Stomper" 1991 Chevy Cavalier euro 2001 Dodge Ram 2500 Cummins Turbo Diesel For Sale: 1976 Pa Custom speed boat 19' Fiberglass Deep Hull "Runabout" Asking 3000.00 OBO |
|
|
|
|
|
06-11-2006, 01:55 PM
|
#3 | |
|
AF Regular
 Join Date: Feb 2005
Location: Thunder Bay
Posts: 180
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Problem with 700R4 Tranny
I'm not sure the exact trannytype I have. But it acts up like that when fluid is low. Topping it up fixs. Maybe an additive to help shifting ? If it uses vacuum lines, be sure no vac leaks anywhere. Or a shop inspection at low cost to just remove pan may be able to adjust bands ?
__________________
1983 S10 4WD carbed 2.8L automatic w A/C |
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
