|
| Search | Car Forums | Gallery | Articles | Helper | Quality Dog Food | IgorSushko.com | Corporate |
|
| Latest | 0 Rplys |
|
|||||||
| Cavalier Problem Diagnosis Got a problem you can't fix? We can help. |
![]() |
Show Printable Version | Email this Page |
Subscribe to this Thread
|
|
|
Thread Tools |
|
|
#1 | |
|
AF Newbie
Join Date: Jun 2006
Location: Mexico
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
|
Reset or Restart Computer to original values
Hi.
I have a problem with my sunfire 2002 2.2L (55000Km). months back I made a injectors cleaning, after the cleaning the consumption of gasoline increase. the gasoline consumption before the cleaning was of 11, 11,5 Km/L, after the cleaning low between 8,5 to 10 km/L I change the air filter, gas filter, spark plugs , recalibrate spark plugs but the gasoline consumption continuous same (high). ![]() is possible to restart the original values of the computer if I disconnect the battery? |
|
|
|
|
|
|
#2 | |
|
AF Newbie
Join Date: Jun 2006
Location: fairbanks, Alaska
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Reset or Restart Computer to original values
Most gm vehicles require a very quick simple procedure to reset the computer. step 1. turn the key to the "ON" posistion./ step 2. disconnect the positive post of the battery./ step 3. leave terminal off for 5 to 10 minutes./ step 4. turn key to "OFF" posistion./ and finally step 5. reconnect battery
|
|
|
|
|
|
|
#3 | |
|
AF Newbie
Thread starter
Join Date: Jun 2006
Location: Mexico
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Reset or Restart Computer to original values
I have listened that the new cars have a "held" memory that not flock so easily, this can be the case of my car?
can I know if this procedure works in my car? , or can I verify if I work? |
|
|
|
|
|
|
#4 | |
|
AF Regular
Join Date: Jun 2006
Location: North Bay
Posts: 248
Thanks: 0
Thanked 36 Times in 35 Posts
|
Re: Reset or Restart Computer to original values
How did you clean the injectors? sounds like the injector cleaner may have contanimated the O2 sensor, which will cause the computer to err on the side rich side of the mixture calibtartions. If that is the case looks like you might be looking at a new sensor
|
|
|
|
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|