2001 Silverado Window Motor

[Murphster05]

Hey, so I read this post:
http://www.automotiveforums.com/vbul...=179932&page=3
and after replacing my window regulator, I am still having some serious issues. My window seems to be going all the way up, but it is really not happy about it, gets REALLY close to stuck about 2/3 - 3/4 of the way up, and then finishes it off very slowly... Is there anything that anyone can think might be able to fix this? I put a lot of lube on the tracks, both sides, and even sprayed some where the window actually sits on the door...thanks in advance for any help!

[Mork]

Sounds like an allignment issue. Take off the door panel again and make sure the window glass is fully seated and square in the rubber clamps of the regulator.

[wafrederick]

The track might bent also and do not use a pair of pliers to pull the window up.If you use a pair of pliers to pull the window up,you will break the glass and I have seen this happen

[Murphster05]

thanks, I will go back and take another look