|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| 240Z | 260Z| 280Z | 300ZX (Past Z Cars) The original Z cars - ones that started it all. |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
04-11-2006, 08:19 AM
|
|||
|
|||
|
Knock sensor help!!
I ran codes on my 91 TT and read that the knock sensor was bad. It has been running ruff and has long starts. I need some advise on how to replace it. I replaced the whole timing belts and the tensioner pulley thinking the timing was off but it is now the knock sensor. If anyone has any links or pictures on how to replace it i will greatly appreciate it a lot
thanks Brandon 
|
|
#2
04-12-2006, 05:59 AM
|
||||
|
||||
|
Re: Knock sensor help!!
The knock sensor is under the intake plenums, bolted right to the top of the block between the cylinder heads. It's mildly intense to get down there. Anyway, might want to make sure that its the knock sensor that's bad and not some fuel/air/spark problem that is causing the poor running and tripping the knock sensor.
__________________
1989 240SX Fastback. . . . . . . . . . . . . . . . . . . . . . . . . . . 1995 300ZX Twin Turbo  Warning: Objects in mirror aren't as fast as they thought they were.
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
