|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
04-01-2002, 08:00 PM
|
|||
|
|||
|
What could I get for my Sportlines?
I am thinking about going to coilovers, but if I do, how much could I get for my Eibach Sportlines which I have had on less than a year (About 10 months now)? I have never delt w/ used parts so I don't know the resale value parts have...Any ideas
|
|
#2
04-01-2002, 08:08 PM
|
||||
|
||||
|
probably about 3/4 the price you paid for them.(just an example: originally $100, sell for $75)
__________________
2004 Sonic Blue Ford Ranger XLT 2001 Liquid Grey Metallic Ford Focus ZX3 1995 Integra GS-R - Parting out
|
|
#4
04-02-2002, 01:39 PM
|
|||
|
|||
|
Quote:
Here it is: http://www.imagestation.com/album/?id=4291977583
|
|
#5
04-02-2002, 10:45 PM
|
||||
|
||||
|
Quote:
Are u sure u wanna go for coilover? After experienced skunk2 coilover, I will never wanna see those things again.. 
__________________
FULL OF S15~~  For sale: http://www.automotiveforums.com/vbulletin/t53308.html
|
|
#6
04-03-2002, 12:29 AM
|
|||
|
|||
|
Quote:
 Right now I have the Sportlines on my car along with the Koni Sports. So, I have something around a 2.7" drop in the front (1.75"+0.98") and about a 2.3" drop in the rear (1.75"+0.59"). It is not that bad right now, I scrape a little, but I am about to put on a lip and some sides so I will be hitting everything! Now, I can raise the perch levels on the Koni's back up to a 0" drop (So only will be dropped the 1.75" from Eibach) but since I am riding on my stock 15" rims, I don't know what it will look like, and I don't want the tire gap again. Also, when I get some 17" rims for cruising I don't want a large gap then either. I kind of want to be able to set my ride height to an acceptable level dependent on the size rims I am using at the time and also to be able to set it to a good height for the track. I don't know. I am most likely going to set the Koni’s back up, put the body work on and take it from there. But we will see....As far as front higher than back, I don't have that problem. My front is exactly 10mm lower than the rear due to the 25mm-15mm Koni lowering. Sorry I can't help w/ the pics. Maybe someone reading this has some side pics of a G3 teg w/ Sportlines alone....
|
|
#7
04-03-2002, 10:11 AM
|
||||
|
||||
|
hey 00GSR, do the 2.7" and the 2.3" make your tires almost tuck under the wheelwell? I mean it as in finger gap...is there any?? Im trying to decide on a good ride height and also to where my tires wont camber in that bad. Thanks.
__________________
2004 Sonic Blue Ford Ranger XLT 2001 Liquid Grey Metallic Ford Focus ZX3 1995 Integra GS-R - Parting out
|
|
#8
04-03-2002, 12:19 PM
|
|||
|
|||
|
Quote:
|
|
#9
04-03-2002, 12:38 PM
|
||||
|
||||
|
Right on. Thanks for your help. i was just looking to see what kinda drop i wanna do with my coilovers on my GSR. Thanks again.
__________________
2004 Sonic Blue Ford Ranger XLT 2001 Liquid Grey Metallic Ford Focus ZX3 1995 Integra GS-R - Parting out
|
|
#10
04-10-2002, 12:43 PM
|
|||
|
|||
|
raise the koni's back to the setting they come on and it will look good and the kit will fit. your still prob going to scrape some anyway. if you just want the coilovers then expect to get about $100 for the used springs.
|
|
#11
04-11-2002, 03:29 AM
|
|||
|
|||
|
anybody interested in Type R stock suspension with Skunk2 coilovers or if you don't want the skunk2's i have my stock springs as well. if interested email me at [email protected]. i got some TEIN ha's right now and my stock suspension is just chilling in the garage. you just need to buy the lower control arms for dc2 and eg chassis.
|
| ||||||||||||||||||||||||||||||||||||||
 |
POST REPLY TO THIS THREAD |
 |
|
|
