|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Car Audio Do you live in your car? Then you need to be able to listen to some high-quality music. |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
02-16-2006, 08:40 AM
|
||||
|
||||
|
Been Gone I'm back
Well I've been pretty bizzy lately so I haven't been on much. Got rid of the Mustang. I have a 2002 Ford Explorer Limited now. It's loaded to the max except for the v8, which I didn't want. I have 2 Avalanche 18's in the back in 13 cubes to 27hz. They're powered by an Autotek Mean Machine MX3000.1 powering them. My Ascendant Arco Components are on the way which will be ran active off an Orion 275SX and a PPI Art Series A200. Later I'm going to get some poly mids for the rear doors to help out with midbass and put a little sound in the back. I still got the stock Alternator and I probably won't change it, because it is the strongest stock Alt I've ever seen. I'm running a D31 off the stock battery and the lowest I can get it to dip is right around 13V. A new HU and some TV's are also soon to come.
__________________
2002 Ford Explorer Limited D31 yellow top Kenwood DDX-7017 2 Ascendant Audio Avalanche 18's 13 cuft NET ported box tuned to 27hz Autotek Mean Machine MX3000.1 Ascendant Audio Arco component set Orion 275SX (Mids) PPI Art Series A200 (tweets) Poly Mids for rear fill to come soon. 
|
|
#3
02-16-2006, 04:24 PM
|
||||
|
||||
|
Re: Been Gone I'm back
Joined the Ava 18 club i see... thats "OK" pretty soon im going to be getting something no one else here will probably ever get and only a handfull will know how to get.
|
|
#4
02-17-2006, 07:52 AM
|
||||
|
||||
|
Re: Been Gone I'm back
I took off some paneling pieces in the back, screwed down the liscense plate and stuffed faom between my sunroof and the cover and that takes car of most of the inside rattles, but outside it goes nuts....... there's not much you can do when the hatch is flexing in and out damn near an inch when its supposed to be locked tight.
Yes I joined the AV club and what are u tryin to get your hands on.... A destroyer..... too bad one of my good friends is already getting two and I might try to get on for myself.
__________________
2002 Ford Explorer Limited D31 yellow top Kenwood DDX-7017 2 Ascendant Audio Avalanche 18's 13 cuft NET ported box tuned to 27hz Autotek Mean Machine MX3000.1 Ascendant Audio Arco component set Orion 275SX (Mids) PPI Art Series A200 (tweets) Poly Mids for rear fill to come soon.
|
|
#6
02-17-2006, 10:53 PM
|
||||
|
||||
|
Re: Been Gone I'm back
Dang bumpin, thats a CRAZY setup...
|
|
#7
02-18-2006, 12:18 AM
|
||||
|
||||
|
Re: Been Gone I'm back
Ya sounds nice man, would love too see pics
__________________
300amp excessive amperage Alpine H/U- Incriminator Audio 20.1 @.35  (2) 15" Q's 8 cubes after 80sqin. 28hz CDT EF-61's Profile AP1040 on comps NSB-100 
|
|
#8
02-18-2006, 04:54 PM
|
||||
|
||||
|
Re: Been Gone I'm back
Quote:
 ...nG
__________________
 I design custom enclosures! And...my sig is short!  Oh and.. YOU  suck balls...  
|
|
#9
02-18-2006, 04:55 PM
|
||||
|
||||
|
Re: Been Gone I'm back
Oh, and mike... you should have brought your ass down here this weekend...
nG
__________________
I design custom enclosures! And...my sig is short! Oh and.. YOU suck balls...
|
|
#10
02-21-2006, 07:35 AM
|
||||
|
||||
|
Re: Been Gone I'm back
Why what went on?
__________________
2002 Ford Explorer Limited D31 yellow top Kenwood DDX-7017 2 Ascendant Audio Avalanche 18's 13 cuft NET ported box tuned to 27hz Autotek Mean Machine MX3000.1 Ascendant Audio Arco component set Orion 275SX (Mids) PPI Art Series A200 (tweets) Poly Mids for rear fill to come soon.
|
|
#11
02-22-2006, 02:06 PM
|
||||
|
||||
|
Re: Been Gone I'm back
Just bought a Kenwood DDX-7017. Its nice. Double DIN 7" screen. Pretty nice controls and features. Very nice picture. Plays everything.
__________________
2002 Ford Explorer Limited D31 yellow top Kenwood DDX-7017 2 Ascendant Audio Avalanche 18's 13 cuft NET ported box tuned to 27hz Autotek Mean Machine MX3000.1 Ascendant Audio Arco component set Orion 275SX (Mids) PPI Art Series A200 (tweets) Poly Mids for rear fill to come soon.
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
