|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
03-31-2002, 09:16 PM
|
||||
|
||||
|
how do i make a vtec light?
how do i make a vtec light for my '97 GS-R? what tools do i need? how hard is it?
__________________
Sadly Retired - 1997 Integra GS-R ---------------------- -17" Exel DL-46 Rims on Kumho 712's -GReddy Evolution Catback -AEM CAI -H&R Sport Springs -Bilstein HD Shocks -Magnecor Plug Wires -B&M Edge Short Shifter -ITR Shift Knob -Alpine 9813 -Infinity Reference 6.5" Components -Infinity Reference 6.5" 2-ways -(2) 12" Kicker Comp VR's -Kicker 400.2 amp -Alpine SEC-150R -Carbon Fiber Euros -Clear Corners -Custom Fogs -Grill Craft front grill 
|
|
#2
03-31-2002, 11:18 PM
|
||||
|
||||
|
Your gonna need a L.E.D light from radioshack with 2 wires coming out the back(one for + the other for -) Ground the - wire to any metal on the chassis and run the + to the VTEC solenoid wire itself(i believe it's green/white). Now when you hit VTEC, the light will light up. You actually have to drive the car to engage VTEC so you just can sit in the driveway and rev it to whenever your VTEC kicks in...you have to be moving.
__________________
2004 Sonic Blue Ford Ranger XLT 2001 Liquid Grey Metallic Ford Focus ZX3 1995 Integra GS-R - Parting out
|
|
#3
04-01-2002, 02:32 AM
|
||||
|
||||
|
ok, i'm an idiot who has to be walked through these things.
where and how do i ground the (-) wire again? where and how do i connect the (+) wire? how do i put the light in my dash? i saw the instructions for this on ebay, is it worth getting?
__________________
Sadly Retired - 1997 Integra GS-R ---------------------- -17" Exel DL-46 Rims on Kumho 712's -GReddy Evolution Catback -AEM CAI -H&R Sport Springs -Bilstein HD Shocks -Magnecor Plug Wires -B&M Edge Short Shifter -ITR Shift Knob -Alpine 9813 -Infinity Reference 6.5" Components -Infinity Reference 6.5" 2-ways -(2) 12" Kicker Comp VR's -Kicker 400.2 amp -Alpine SEC-150R -Carbon Fiber Euros -Clear Corners -Custom Fogs -Grill Craft front grill
|
|
#4
04-01-2002, 08:48 PM
|
||||
|
||||
|
Connect the (+) wire to the VTEC solenoid wire(green/white)..(under the hood by the distributor) and the (-) to any metal on the chassis. You can put the light anywhere you want on the dash....you just have to cut or drill a small hole and run it through from the back or you could even put it in the guage cluster itself. I hope this helped this time.
__________________
2004 Sonic Blue Ford Ranger XLT 2001 Liquid Grey Metallic Ford Focus ZX3 1995 Integra GS-R - Parting out
|
|
#5
04-02-2002, 02:17 AM
|
||||
|
||||
|
i'm still not sure how to get the bulb from outstide to into the dash. how do i even open it up to get to it?
__________________
Sadly Retired - 1997 Integra GS-R ---------------------- -17" Exel DL-46 Rims on Kumho 712's -GReddy Evolution Catback -AEM CAI -H&R Sport Springs -Bilstein HD Shocks -Magnecor Plug Wires -B&M Edge Short Shifter -ITR Shift Knob -Alpine 9813 -Infinity Reference 6.5" Components -Infinity Reference 6.5" 2-ways -(2) 12" Kicker Comp VR's -Kicker 400.2 amp -Alpine SEC-150R -Carbon Fiber Euros -Clear Corners -Custom Fogs -Grill Craft front grill
|
|
#6
04-02-2002, 11:58 AM
|
||||
|
||||
|
ok.....Just run the wires through the firewall and once they are through there then you can maybe pop something out on the dash and drill a hole in it and then pop it back in and run the light through the back. It's seriously not hard at all man. If it's too complicated for you then i would suggest not doing it.
__________________
2004 Sonic Blue Ford Ranger XLT 2001 Liquid Grey Metallic Ford Focus ZX3 1995 Integra GS-R - Parting out
|
|
#7
04-02-2002, 03:14 PM
|
|||
|
|||
|
I have seen those things on ebay before. They come with everything you need including installation instructions (or so they say).
http://search.ebay.com/search/search...ery=vtec+light
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
