change headlamp 1998 S-10

[NJBOB]

Hi, All this weekend I had to change my headlamp on the drivers side of a 1998 S-10 with the 2.2L 4 cylinder. I took out the air cleaner box, then I had to remove the 2 screws next to the top adjuster. I was then able to tilt the haedlight down to gain access. But it was very tight and not easy to change. Is there an easier way to do this? It took me quite some time and was wondering if the driver side is just as hard.

[mike1224]

on my 2000, theres clips behind the aqssembly, pull them UP. It took me some head scratchinhg on replacing the bulbs too.... after i find some pants i'll take some pictures

[mike1224]

heres a pic of the clips..... like i said before just upll up on them, and the whole assembly comes off.

[NJBOB]

Thanks Mike, But I don't think my truck has those clips. Maybe GM realized it was an issue and made an improvement. But I will check to make sure. Thanks for the pics they were very clear. Bob

[dmbrisket 51]

my 98 has the same clips in it

[NJBOB]

Thanks Guys! I checked my truck and it does indeed have those clips! Wish I had known that before changing the headlamp!

[mike1224]

theres always a easier way to do things after its finished!