|
Re: Problems with a check engine light and check battery light
Yes, low system voltage *can* cause the CEL to illuminate.
Before you replace a possibally good (expensive) alternator, make sure that the battery is good, and that the alternator is indeed bad.
Charge the battery if needed (12.5-12.6 Vdc at rest). Have it load tested (many parts stores like AutoZone will do for free). If the battery is OK, THEN check the alternator with a volt meter. You should see a minimum of 13.6Vdc from the alternator case to the (+) post on the alternator, if not it is bad. If you do see good voltage at the alt, now check from the (-) battery terminal to the Alt (+) terminal, reading should be exactly the same as before. If not (lower by 0.3Vdc or more), then you have a wiring problem. The most common wiring problems are corroded terminals, loose terminals, and broken wire strands - all these cause high circuit resistance and poor charging.
Check and clean ALL the battery connections that you can find AFTER disconnecting the battery of course.
|