|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
08-29-2005, 01:08 AM
|
||||
|
||||
Quit ABS Forever (1989 to 1992)
OK guys... This is a good post for the peolpe who want's to quit the ABS system from 1989 to 1991) (maybe 1992 too).. OR Blazers with this kind of ABS system...
i already replace speed sensor and nothing works..(this blazer models dont have sensors in the wheels) This Conversion Works only with blazers with ABS module like this..(look at the Picture) [IMG]  [/IMG] And yes.. i'll clean all the dust  so.. i bought a new proportioning valve from a 88 chevy S-10 (non-ABS) in a junk yard.. for only 15 dlls.. 1-Disconnect the negative Battery cable. 2-Disconnect the ABS module cables. 3-Quit the ABS module (black box) 4-buy a new extension for the brake lines from valve fo fit the master cylinder ... 5-Reconnect the brakes lines.. 6-Throw away all the ABS cables ... 7-bleed the Brakes... and that's all.. The ECM will not detect the ABS anymore... you have a new-old brake system. You already have an 88 blazer brake system.. my new brakes works 100+1 % great  look at the new picture... [IMG]  [/IMG] i took this picture in the night , so there's not too much light. i hope this little tutorial help to all. Nalgman 
|
|
#2
08-29-2005, 01:59 AM
|
||||
|
||||
|
this is the ABS
this is the ABS proportioning valve,
this has two valves that connect each other.. one valve is a mechanical valve and the other is an electronic valve sharing the brake fluid. this two valves are the ABS system.[IMG]  [/IMG] Nalgman
|
|
#3
08-29-2005, 09:09 AM
|
||||
|
||||
|
Re: Quit ABS Forever (1989 to 1992)
Crazy and we told you a month ago to clean that engine.Lol.I don't have that AbS in my 91 and im glad for it
__________________
1991 Chevy S-10 Blazer 5.7 V8 RIP 1999 Chevy Blazer 2dr 4.3
|
|
#4
12-23-2005, 07:13 PM
|
|||
|
|||
|
Re: Re: Quit ABS Forever (1989 to 1992)
I had a 92 Blazer that had ABS problems. It had the big control box above the left front fender. All I had to do was disconnect the two electrical connectors on the top. No ABS and no light.
|
|
#5
12-23-2005, 09:51 PM
|
||||
|
||||
|
Re: this is the ABS
Quote:
It has nothing to do with ABS. If you want to disable ABS, all you have to do is unplug the module.
__________________
Why do you never have enough time or money to do the job right the first time, but enough time and money to do it again? Got all the certifications 25 years ASE Certified Master Technician GM WCT Yea..I work at a DEALERSHIP....got a problem with that? Want to diagnose cars like the Pros? FOR SALE: OTC Perception 2 channel Labscope (badged as a Matco Reality) This is my personal labscope that I use to diagnose waveforms, like new, comes with leads and training video PM Me for details
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
