|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| '88 - '91 Civic | CRX | Wagon | Shuttlee Partnership with: LadyNRedSi.com |
![]() |
Show Printable Version |
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
|
||||
|
||||
|
Can this be done?
Just how hard would it be to swap the gears from a 87 teg to a 89 civic trany?
The gearboxes are allmost the same just 1 bolt will not go in without mod. Dont aske why......you will not like the answer
__________________
|
|
#2
|
||||
|
||||
|
No ideas ? or is it just a dumb question?
__________________
|
|
#3
|
|||
|
|||
|
Re: Can this be done?
Never tried it, and I doubt many others have either.
__________________
90- crx si w/ a D16a Vtec and a few goodies, oh and 60k miles on it heh |
|
#4
|
|||
|
|||
|
so why do you want to do this.
i did a swap in my civic. i took the stock dx tranny out and put a hf tranny in and i got a lot of shit from people on this site. |
|
#5
|
||||
|
||||
|
Re: Can this be done?
Quote:
Someone said that the teg. gears would be better then a D14A1 gears Edit: and D14A1 gears are making a weird noise in 4th and 5th gear around 70mph and the shifter shakes. So i was thinking on why not try to swap the gears....i have been liiking at the teg and civic manual and sofar i cant see any reason why it should not work....but i needed someone to confirm this.....I dident know that noone had tried this
__________________
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|