You know your girl is dumb if...

[Thor06]

6'1" at 145? Jesus kid, go eat some damn food! Just playin. 2 1/2 years ago I was 5'11" at ~250 (not sure, I went to 240 and wouldnt weight myself anymore, but the pants kept getting smaller) and now I am sitting at 6'3" and 195 .

[colinlesser]

hell 2 and a half years ago iwas still sneaking through the hole in the fence at the beer factory in my home town rollin out with kegs

[Chevy4life1985]

Originally Posted by colinlesser

and a ufo didnt crash in roswell

wtf does that mean?

[colinlesser]

i was drunk

[Chevy4life1985]

Originally Posted by colinlesser

i was drunk

HAHAHAH by the way what did u do to paint your interior. I want to paint mine but dont know what to do.

[colinlesser]

its a real bitch to do belive me, it took 4 days to do right, belive me you dont want it to look half assed otherwise it will be looking you in the face all the time, so ill put it up,
ok first remove what ever you want to paint, go get some 800grit wet sand and sand everything as good as you can depending if you want to keep the bumpyness, then get a RED scuffpad for a hardware store and go to town on that bitch, using circular motions and whatnot to get in all the recessed areas, then clean it with paint thinner really good, after that let the thinner dry for maybe 10 minutes then use pure alcahol to clean again, dont touch any area your painting with your hands cause the oils in your hands will cause spotting, now your ready to paint assuming you dont need to tape anything as in my 04 which i needed no tape at all, the next thing is to have the right paint krylon fusion i by far the best ive seen so far, now dont half ass anything or you will regret it belive me (i painted mine 2 times cause my dumb ass g/f handed me the adhesive spray instead of the clear coat and everything melted) anyway back to the subject on hand, make sure you have somewhere clean to put you painted parts or dust and junk will collect on the paint, ok your ready to paint now using the krylon fusion apply 1 light coat ever 45 minutes or hour, you will want to do at least 3 coats but its up to you i did 3, then once dried you will want to clear coat, again try to get krylon clear for that now with the clear coat do 2-4 coats with about a hour and a half between coats, then let them dry for about2 or 3 days to fully cure and thats about it, remember you go cheap or rush you will get pure shit

[Chevy4life1985]

Also did u do those tailights urself? and how did u do those (no im not going to to those tailights i was just curious)

[colinlesser]

yes i did them, it was simpel just about the same as doing the inter minus the sandpaper but still using scuffpad, very percise taping, and good old black krylon fusion black and some patience, im actually making a body kit at the moment, it seems to be one of my skills making things, i hate being a person that buys things that bolt on , i perfer to fabricate, just like my CAI is hand made