|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
01-22-2004, 05:54 PM
|
|||
|
|||
turn signal 2000 mali
were having problems with turn signals they wont work and clicking from dash stops .asked parts store if the 2000 malibu had a flasher said i did not.checked all bulbs and wires any suggestions .did i get bad info can anyone please help i hate people that dont signal now im one of them.
turn signal and clicking does work when they want to not all the time 
|
|
#2
01-24-2004, 08:40 PM
|
|||
|
|||
|
hey zoomie, next time it acts up try smacking on the dash just above the hazard switch, if they come back on then replace the hazard switch, the flasher is built into the hazard switch.
|
|
#3
02-06-2004, 10:29 PM
|
|||
|
|||
|
Re: turn signal 2000 mali
hey it worked now im trying to figure out how to remove hazard switch does the wood grain panel just pop off or is there screws somewhere thanks again for all the help
|
|
#4
02-07-2004, 07:33 AM
|
||||
|
||||
|
Re: Re: turn signal 2000 mali
Quote:
__________________
Why do you never have enough time or money to do the job right the first time, but enough time and money to do it again? Got all the certifications 25 years ASE Certified Master Technician GM WCT Yea..I work at a DEALERSHIP....got a problem with that? Want to diagnose cars like the Pros? FOR SALE: OTC Perception 2 channel Labscope (badged as a Matco Reality) This is my personal labscope that I use to diagnose waveforms, like new, comes with leads and training video PM Me for details
|
|
#5
10-12-2004, 11:11 PM
|
||||
|
||||
|
Re: turn signal 2000 mali
I drive a 98 and messed with my bulbs, blew a few fuses, so then i put the stock bulbs in. Changed fuses, i think they worked a while. But a few hours later the parking lamps work, but no turning and hazards? what do you think i should do, my turn signal fuse blew i changed it still no luck...i made sure the wire was connected to the hazard button and still no luck please help
|
|
#9
10-23-2005, 12:05 PM
|
|||
|
|||
|
Re: turn signal 2000 mali
I removed and reinstalled the same hazard switch and I've had no problems for two weeks so far. I did rub some graphite (pencil lead) on the contacts, which may or may not have helped.
|
|
#10
11-05-2005, 11:35 AM
|
|||
|
|||
|
I have a 97 malibu and started having this problem.. Now I know what to look for. I did know there no flasher or more that it was not a replacable part.. But it clear now that there really is and its the hazzard switch.. Thanks..... I did also notice when I engaged the flasher my turn signals would work after. I always have done this trick before to test my external flasher on other cars.. I do like this malibu it came with my wife of 2 years got her a mini van and I drive the malibu to work.. i like it so much now that i will most likley get another one or another GM with the same motor.. Its one tuff machine.. my wife before we met drove the thing over 30,000 miles with out changing the oil I saw here quick lube sticker and checked the milliage and there was over a 30,000 mile gap there.. I asked her had she had the oil changed between that time and she said no!! but the oil light came on and I added some to it every time it came on.LOL
 I finally changed it and this thick stuff came out.. Yes there was sluge but I ran some light motor oil through it 5w20 for 100 miles 2 times and switch to synthetic motor oil it had a little bearing noise but still runs quick and strong. smokes a little on quick take off but nothing to unusal with a car that has 135,000 miles on it..If she took care of it it would most likey have seen 200,000 miles but its still going it could make it... I only drive it 16 miles a day back an forth to work so it will be long time before that happens if I dont get a newer one first..I work on cars on the side and never seen one with a tough motor like this..30,000 miles without chageing the oil..INSANE 
|
| |||||||||||||||||||||||||||||||||
 |
POST REPLY TO THIS THREAD |
 |
|
|
