-
Grand Future Air Dried Beef Dog Food

Carnivore Diet for Dogs

Air Dried Dog Food | Real Beef
Go Back   Automotive Forums Car Chat > Dodge > Ram Pickup | Ram SRT10
Register FAQ Community
Reply Show Printable Version Show Printable Version | Subscription Subscribe to this Thread
 
Thread Tools
  #1  
Old 10-25-2005, 08:35 PM
turbojusty turbojusty is offline
AF Newbie
 
Join Date: Jul 2005
Posts: 15
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via MSN to turbojusty
what size engine do i have?

I picked up an 8cyl on the weekend. Its out of a 1979 Sportsman cube van, 3 speed auto. I was told it was a 318, but while browsing the internet looking for more info on the motor, someone said to look on the front left side of the block and thats where I can find the displacement. Well, the number on the block was this: 4006830-360-9....so, now i dont really know what that means, but if thats the number thats showing my displacement, i dont see a 318 anywhere in there...am i getting my hopes up for nothing here or do i have a 360 and not a 318??

thanx
mike
Reply With Quote
  #2  
Old 10-25-2005, 09:43 PM
smithm smithm is offline
AF Newbie
 
Join Date: Sep 2005
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
Re: what size engine do i have?

just figure out the litres if you can
Reply With Quote
  #3  
Old 10-25-2005, 09:44 PM
smithm smithm is offline
AF Newbie
 
Join Date: Sep 2005
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
Re: what size engine do i have?

if not then it might be a 318 more than likely
Reply With Quote
  #4  
Old 10-26-2005, 04:05 AM
Blylock Blylock is offline
AF Newbie
 
Join Date: Jan 2004
Posts: 58
Thanks: 0
Thanked 0 Times in 0 Posts
Re: what size engine do i have?

Quote:
Originally Posted by turbojusty
I picked up an 8cyl on the weekend. Its out of a 1979 Sportsman cube van, 3 speed auto. I was told it was a 318, but while browsing the internet looking for more info on the motor, someone said to look on the front left side of the block and thats where I can find the displacement. Well, the number on the block was this: 4006830-360-9....so, now i dont really know what that means, but if thats the number thats showing my displacement, i dont see a 318 anywhere in there...am i getting my hopes up for nothing here or do i have a 360 and not a 318??

thanx
mike

i would hope for a 318
__________________
1998 Ram 1500 SLT 4x4
5.9L
Dynomax Performance Dual Exhaust
KN cold air intake
Bosch +4 Platnum Plugs
180 Degree Thermostat

I would suggest to anyone with a Ram to convert to a performance exhaust, especially if towing alot.
Reply With Quote
  #5  
Old 10-26-2005, 08:43 AM
fredjacksonsan's Avatar
fredjacksonsan fredjacksonsan is offline
Caution: Monkeys bite!
 
Join Date: Apr 2004
Posts: 10,143
Thanks: 15
Thanked 75 Times in 70 Posts
Send a message via AIM to fredjacksonsan
Re: what size engine do i have?

If you're planning on tearing it apart, just measure the bore. 318 is 3.31", and 360 is 3.58".

From:
http://www.allpar.com/mopar/318.html
__________________
Ours: 2020 Jeep Wrangler 2.0, 53k
2013 Toyota FJ Cruiser, 84k
Kids: 2005 Honda CRV, 228k
Reply With Quote
  #6  
Old 10-26-2005, 01:19 PM
2000mudder's Avatar
2000mudder 2000mudder is offline
AF Enthusiast
 
Join Date: Mar 2004
Posts: 430
Thanks: 0
Thanked 0 Times in 0 Posts
Re: what size engine do i have?

as far as i can tell, you have a 360. the casting numbers are more specific than the stamped numbers with chrysler. imagine that. post casting numbers from block and heads
Reply With Quote
  #7  
Old 11-06-2005, 09:42 PM
TurboDuck's Avatar
TurboDuck TurboDuck is offline
AF Newbie
 
Join Date: Jan 2005
Posts: 89
Thanks: 0
Thanked 0 Times in 0 Posts
It sounds like you have a 360 - another way to tell is to look at the torque convertor. The 360 is an externally balanced engine, the convertor will have an extra weight welded on it if it's a 360. The front damper is different as well.

Good luck, Gary.
Reply With Quote
  #8  
Old 11-08-2005, 05:52 PM
dadodgekid dadodgekid is offline
AF Newbie
 
Join Date: Nov 2005
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
its definitely a 360 the last 4 casting numbers on the block will tell you this , which in fact, say -360-9 so you have a 360
Reply With Quote
 
Reply

POST REPLY TO THIS THREAD

Go Back   Automotive Forums Car Chat > Dodge > Ram Pickup | Ram SRT10


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 03:59 AM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts