Wiring harness locks

Electricblue.neon · #1 10-12-2005, 03:11 PM

Hey all
I am having a problem removing the wiring harness from the oil pressure dummy switch.
There is a red sliding latch lock that I released.Is there two locks on this harness connector?I pryed softly with a screwdriver and it's not moving.
I remember on the radiator fans there were two different locks on the harness connector.
Mike

sheetmagnet · #2 10-12-2005, 11:25 PM

Yes... you need to slide the red tab out (like you did), and then push down on the little black pressure-tab in the center to release the hook then yank it.

Electricblue.neon · #3 10-13-2005, 05:48 PM

Quote:

Originally Posted by sheetmagnet

Yes... you need to slide the red tab out (like you did), and then push down on the little black pressure-tab in the center to release the hook then yank it.

Thanks a million Sheetmagnet
Mike

sheetmagnet · #4 10-14-2005, 12:21 AM

Quote:

Originally Posted by Electricblue.neon

Thanks a million Sheetmagnet
Mike

Anytime. Out of curiousity, what are you removing it for?

Electricblue.neon · #5 10-14-2005, 06:50 PM

Quote:

Originally Posted by sheetmagnet

Anytime. Out of curiousity, what are you removing it for?

The switch went bad.The part is only 6.99.
Mike

sheetmagnet · #6 10-15-2005, 02:47 AM

Quote:

Originally Posted by Electricblue.neon

The switch went bad.The part is only 6.99.
Mike

Oh okay. Heard of people trying to add a pressure gauge and having probs off and on, just asking... anyway cool you fixed it.

Electricblue.neon · #7 10-20-2005, 02:17 PM

Son of a .....
There are two locks.The red slider and one on top that has to be lifted up.
Mirror,toothpick finally got it.

POST REPLY TO THIS THREAD