|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
10-12-2005, 02:46 PM
|
||||
|
||||
|
six speed
is there a way you can drope the vr4 six speed in to a sl and with makin it awd. like can't i just not hook up the rear axle. reason for asking is i won't to put the twin turbo motor with the six speed into an sl but leave it front wheel drive just want to know can it be down. i mean i've heard of people welding the rearaxle and making it fwd.
__________________
W O W!!  !! so you have a honda civic
|
|
#2
10-12-2005, 02:57 PM
|
||||
|
||||
|
Re: six speed
I b/l there's a kit you can put on the VCU that will solve that problem, but yes, you can drop the VR4 transmission into an FWD with a non-turbo motor... the biggest issue you will want to be careful of, is the transmission years... the 91-93's have 21 spline (I b/l) shafts, while the 94-99 have 25 spline shafts... you can always get the other transmissios shafts... but it'd be a pain in the butt to have everything pulled apart and realize you've got a problem
__________________
Quote:
1991 Eagle Talon TSI - Broken  Head removed, block broken, trans in hatch  1991 Eagle Talon TSI AWD- in pieces 3" exhaust, rebuilt bottom end  Project: Assemble the Eagle is underway... and now with AWD 2003 Lancer Evo 1630hp/1593ft lb tq
|
|
#3
10-12-2005, 03:34 PM
|
|||
|
|||
|
Re: six speed
Yes, you will need to weld the VCU or center plaentary gears for it to work. You will also need the AWD axles.
__________________
A few "bolt on" mods, a couple "cut, smash, hammer, weld, etc" mods, and a couple "why the hell do I need this/what the hell is this" weight reductions.
|
|
#4
10-12-2005, 03:44 PM
|
||||
|
||||
|
Re: six speed
I'm sorry, I wasn't aware that the AWD and FWD axles were different...
__________________
Quote:
1991 Eagle Talon TSI - Broken Head removed, block broken, trans in hatch 1991 Eagle Talon TSI AWD- in pieces 3" exhaust, rebuilt bottom end Project: Assemble the Eagle is underway... and now with AWD 2003 Lancer Evo 1630hp/1593ft lb tq
|
|
#5
10-12-2005, 04:43 PM
|
|||
|
|||
|
Re: six speed
Well techinically the 93+ FWD axles are the same as the 91-99 AWD axles, but the intermediate shafts are different lengths, and the intermediate shafts are connected to the axles.
__________________
A few "bolt on" mods, a couple "cut, smash, hammer, weld, etc" mods, and a couple "why the hell do I need this/what the hell is this" weight reductions.
|
|
#6
10-13-2005, 07:04 AM
|
||||
|
||||
|
Re: six speed
ah, true... I never thought of that.... thanks, you've been very insightful
__________________
Quote:
1991 Eagle Talon TSI - Broken Head removed, block broken, trans in hatch 1991 Eagle Talon TSI AWD- in pieces 3" exhaust, rebuilt bottom end Project: Assemble the Eagle is underway... and now with AWD 2003 Lancer Evo 1630hp/1593ft lb tq
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
