helpppppp no spark,how to remove igniter unit

[jtchevy355]

hey guys i was driving my 1993 honda accord when it died while drive down the road,towed it back home waited awhile and tried to start it still nothing,so i checked the spark and there is no spark,did some calling around alot of them think is the igniter unit,so i took the cap and rotor off,and this is where i need some help,how do you get the igniter unit out?thanks for your help...jt

[gitter44]

I would ckeck the coil first...

[jtchevy355]

Originally Posted by gitter44

I would ckeck the coil first...

the coil is new

[jtchevy355]

got it fix,it was the igniter unit

[BullShifter]

That's very common after repalcing a coil, the igniter goes bad. Same happens when the igniter is replaced, the coil goes bad.

[gitter44]

Originally Posted by jtchevy355

got it fix,it was the igniter unit

Did you use an oem Igniter and coil? The reason I ak is because when I replaced my coil with an aftermarket one the igniter went bad 2 weeks later.3 weeks after that the coil went bad again...Went to honda and bought both the coil and igniter from them and two years later no problems yet.

[jtchevy355]

hey well i thought it was the coil at first,and the honda dealer isn't open on sunday so i had to get the coil at schuck's,but i waited to get the igniter unit at the honda dealer and that was the problem,

[5thGenAccord]

you might want to check your spark plugs and see if there is any oil on it. maybe thats why your ignitor went out. CHECK SOME OF MY THREADS. ON THIS PAGE.