|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
08-26-2005, 12:42 PM
|
||||
|
||||
300zx Break Questions
I got some z32 calipers for the front on the way, and im startin to part everything else together i need for them. Just lookin for advice on everything i need to make this go off easy as i can.
Will i need the z32 master cylinder for just the fronts? Do i need one of the rebuild kits or can i put them on just as i get them? by rebuild kit i mean one of these http://pdm-racing.com/products/brakesz32.html the next item after the actual brake upgrade at the top. has anyone done the rears, i can get them real cheap but most ppl say its to much work. has anyone done it and is it worth it?
__________________
 RB20DET, 260whp, Drive to Destroy. 
|
|
#2
08-26-2005, 01:00 PM
|
|||
|
|||
|
Re: 300zx Break Questions
I hear people don't change the MC when doing only the fronts. I upgraded the front calipers, MC, and ss lines all at once so I wouldn't know what it would feel like w/out the z32 MC (nabco 1 1/16"). However, I really like how the brake feels, it's a lot stiffer and it stops on a dime. I'm assuming you probably won't get that response on a 240 stock MC. I have the parts for the rear swap, but since my engine is stock I think it would be overkill for me to do it. Plus for a 98 I heard the ebrake lines are a pain to connect. As for the rebuild kit, you're probably going to have to get the pins and connectors depending on the condition of the ones you got.
|
|
#4
08-26-2005, 07:18 PM
|
||||
|
||||
|
Re: ...uggh...
Quote:
__________________
RB20DET, 260whp, Drive to Destroy.
|
|
#5
08-26-2005, 07:57 PM
|
||||
|
||||
|
Re: 300zx Break Questions
you definitely don't NEED the master cylinder but you won't get everything out of 4 pistons with the stock mc.
__________________
Quote:
http://www.cardomain.com/id/dbo240  ***LOOKING FOR A COUPE, ENGINE IS NOT AN ISSUE***
|
|
#6
08-26-2005, 09:00 PM
|
||||
|
||||
|
Re: 300zx Break Questions
well i think i mite just buy the calipers b/c i can, the place only wants 80 for them, thats what i got my front for too... i am gonna buy a MC on monday and then ill start gettin the pads and rotors and stuff... and the rebuild kit if it seems like i need them
__________________
RB20DET, 260whp, Drive to Destroy.
|
|
#7
08-26-2005, 10:52 PM
|
|||
|
|||
|
Re: 300zx Break Questions
U NEEED THE MC!!!! dude, Z32 brakes NEEED Z32 MC. the stock MC can't handl 8 extra pistonz!
http://importnut.net/300zxbrakeswap.htm#compare
__________________
"A good driver is measured not by his lap times, but by the amount of time he spend trying to make sense of his car" E.K.
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
Brakes....
