|
Re: rear seat removal
Push the front seat(s) forward all the way and climb in the back. Grab the lower rear seat cushion and push down and back. Once it is back lift up and forward. If you look under the seat with a light you will see the attachment design and better understand how this will work. Once the bottom section is out there should be two bolts visible at the bottom of the upper section that attach it to the floor. Remove these bolts and lift the section up and out.
Be careful to not allow the lower brackets to touch anything on the way out. They are sharp and will cut seats or door panels.
__________________
Mark's Garage est. 1983
|