|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| '88 - '91 Civic | CRX | Wagon | Shuttlee Partnership with: LadyNRedSi.com |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
07-13-2005, 06:33 AM
|
||||
|
||||
|
ECU Pins
Does anybody know if the pins to connect wires into the ecu are the same for all three connectors? I need to put a new wire into connector "A" and all I have is an extra connector "B" so I'm curious. I'd rather save a trip to the junkyard.
One more question, what rpm does vtec kick in on a stock B16? Thanks! 
|
|
#2
07-13-2005, 10:05 AM
|
||||
|
||||
|
i believe stock vtec engagement is 5700.
what is it that ur installing a wire for.. just outta curiousity?
|
|
#3
07-13-2005, 03:12 PM
|
||||
|
||||
|
I bought a crx with a b16, and also a Field's vtec controller. He never wired the vtec from the controller to the ecu. Now I want to get rid of the check engine light.
|
|
#4
07-16-2005, 05:40 PM
|
||||
|
||||
|
Re: ECU Pins
the pins on A plug are bigger than the pins on B and C plugs.
__________________
over 10 grand in parts, and about 300 hours of labor, and i only spent 3k. and then Katrina filled it with mud.
|
|
#5
07-17-2005, 04:18 PM
|
||||
|
||||
|
Thanks. I guess I'll be needing a trip to the junkyard. It's too bad that there is only one crx at the local junkyard. It's almost completely stripped already. (Thanks to me and my friends
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
