|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#121
|
||||
|
||||
|
Re: Damn Copers
How much does earl eat?
Oh and to the quesiton about my grips on the free pistol. The more surface are you can get between your hand and the grip = better |
|
#122
|
||||
|
||||
|
Re: Damn Copers
whats earl do in da quarter mile. its gotta be pretty low considering all the money you put into him
__________________
87 firebird formula ws6 (currently has a old 78 305 with the following upgrades, including lots of miles and stock heads and internals....oops) crane cam cam specs performance valve springs and retainers, flowtech headers, 255 lph fuel pump, holley 600cfm carb, weiand single plane manifold, a healty diet. 14.90 1/4 mile....just wait for the 406 to be finished MY VIDEOS MY PICTURES -Tom |
|
#123
|
||||
|
||||
|
Re: Re: Damn Copers
Quote:
__________________
All Throttle, No Bottle! Torque Makes You Go... FAST! Horsepower Is For Braggin Rights. Money talks, But all mine ever says is Goodbye ~Viper ![]() "twospirts" / "TS" - Definition: Obsolete |
|
#124
|
||||
|
||||
|
Re: Damn Copers
those pistols are bad ass man, didnt say that before, they look like something out of star wars
__________________
Chevrolet Camaro - I enjoy beating the hell out of people http://www.automotiveforums.com/vbulletin/showthread.php?t=68052 |
|
#125
|
||||
|
||||
|
Re: Re: Damn Copers
Quote:
__________________
|
|
#126
|
||||
|
||||
|
Re: Damn Copers
Quote:
yea... i have spacers on it, you need them for most aftermarket wheels on third gens. I haven't really driven the car enough yet to know how it performs. I've only taken it out on 2 test drives since I've done all the mods. (and of course, I was going easy on it) Spacers won't affect handling unless you don't keep the proper geometry between the wheel and rotor. Generally speaking, the rotor should be in the very center of the inside of the wheel. I've have also added a few other things, steering brace, lowering springs, Tokico performance shocks, polyurethane sway bar links. So I wouldn't be able to tell you what the difference is (from experience) with adding the spacers cause there are so many other factors. But if you get 4th gen wheels or wheels that are similar, 2" spacers should work fine.
__________________
90 Camaro RS V6 - swapped to V8 -350 block, GM Vortec L31 Heads, Edelbrock Performer RPM Vortec intake, 750cfm carb, CompCams XE268 Camshaft ESTIMATED 360-420 hp 380-430lb/ft torque
|
|
#127
|
||||
|
||||
|
Re: Damn Copers
TECHNICALLY: Earl gets like 4 Cups of dry food and 1 can of food every day.
ACTUALLY: when the kids are around, he gets popcorn, ice cream, cereal, macaroni & cheese, whatever is for dinner.... you get the point. The bastard actually stole a loaf of bread the other day and ate the whole damn thing, even the bag. He can pretty much walk up to the kitchen table and get whatever he wants without straining (& then I beat the shit out of him), and you can't leave anything near the copunter edges, or you might as well have not even bought it. Oh and I don't think he's ever run more than about 100 feet at one time, so in a quarter mile you'd probably have to get the paddles out and an oxygen mask. His favorite is playing stalker at night time though. He sneaks up on you and attacks... sometimes he gets a litle rough. I'd hate to be the poor bastard that breaks into my house. never know what the hell is going on until he's crushed your neck, arm or leg. (He eats 2x4's as a chew toy). |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|