-
Grand Future Air Dried Beef Dog Food
Air Dried Dog Food | Real Beef

Carnivore Diet for Dogs

Go Back   Automotive Forums Car Chat > Mitsubishi > Eclipse/Talon/Laser > Off-Topic
Register FAQ Community
Off-Topic Talk about anything other than cars.
Reply Show Printable Version Show Printable Version | Subscription Subscribe to this Thread
 
Thread Tools
  #1  
Old 05-27-2005, 10:02 PM
DragonofBC DragonofBC is offline
AF Regular
 
Join Date: Aug 2003
Posts: 390
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via AIM to DragonofBC
T25 to 14B conversion

Hey all. My car is in my sig and I was thinking about making the jump up to a 14B. I had a few questions though I was hoping some experienced DSMers could help me out with.

1) What do I need to get to do the conversion? I know I'd need the turbo and I've read about the return and oil lines. What else would I need? Also what tools do you need to do the job?

2) Can anyone point me to a good write-up of the procedure? I'm planning on doing the job myself and have little to no experience working on cars. I did the BOV, UICP, and FIPK on my own for my car but I figure this will be more of a process and its something will help me better understand my car in the end.

3) The reason for the conversion is that today my dad was following me home from the mechanic and he noticed that whenever I'd accelerate hard and shift, there would be a small cloud of blue smoke out my exhaust pipe. When I was changing my intake pipe, I dug into the stock turbo and felt the shaft jiggle a bit so I'm guessing that my T25 is on its way out (141k miles). I know there are a lot more factors that play into this question but should replacing the turbo be something I make a priority or do I have some time (months, years) before anything will blow up?

Thanks for any help you can offer. I need my car to last for a few more years and want to catch any problems before they become disasters.
__________________

2003 Mustang GT Convertible - 5sp. - K&N drop in, MAC catback, Eibach Pro Kit springs, Strange s/s, GMS UCAs/LCAs, MGW shifter, Nitto 275s out back. Does it ever end...
Reply With Quote
  #2  
Old 05-27-2005, 11:51 PM
sganc4life_4 sganc4life_4 is offline
AF Enthusiast
 
Join Date: Jan 2005
Posts: 1,316
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via AIM to sganc4life_4
Re: T25 to 14B conversion

vfaq.com look at the 16g install, same thing

BTW u also need a MBC, walbro 190/255 fuel pump(255 requires a regulator), new gaskets if u really want them and LICP to take the extra boost if u dont already have them

You can also find a 1g return line and use that instead of buying a new one
__________________
95 Eclipse GS-T
6 bolt built block - shooting for 450 hp..very doable
Currently:
A lot, check progression thread - updated 3/27/10
Estimated completion date:
Soon lol
Reply With Quote
  #3  
Old 05-28-2005, 12:06 AM
DragonofBC DragonofBC is offline
AF Regular
Thread starter
 
Join Date: Aug 2003
Posts: 390
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via AIM to DragonofBC
Re: T25 to 14B conversion

Are the fuel pump and LICP necessary if I'm not looking to up my boost yet? I've got a MBC waiting for install but I figured I would just leave the boost low until I got the supporting mods for higher flow.
__________________

2003 Mustang GT Convertible - 5sp. - K&N drop in, MAC catback, Eibach Pro Kit springs, Strange s/s, GMS UCAs/LCAs, MGW shifter, Nitto 275s out back. Does it ever end...
Reply With Quote
  #4  
Old 05-28-2005, 12:09 AM
sganc4life_4 sganc4life_4 is offline
AF Enthusiast
 
Join Date: Jan 2005
Posts: 1,316
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via AIM to sganc4life_4
Re: T25 to 14B conversion

fuel pump would be necessary at higher boost, so u can wait off on those 2 if u want

extremepsi.com has fuel pumps for 95 +free shipping
I got my dejon licp from a guy only for 75
__________________
95 Eclipse GS-T
6 bolt built block - shooting for 450 hp..very doable
Currently:
A lot, check progression thread - updated 3/27/10
Estimated completion date:
Soon lol
Reply With Quote
  #5  
Old 05-28-2005, 01:15 AM
Killa_DSM's Avatar
Killa_DSM Killa_DSM is offline
AF Enthusiast
 
Join Date: Jan 2004
Posts: 726
Thanks: 0
Thanked 0 Times in 0 Posts
Re: T25 to 14B conversion

If you dont run that much boost you should be fine with a rewired fuel pump.

http://www.dsmtuner.com/forums/showthread.php?t=92558

You can reuse your oil drain line but you will have to file the bolt holes out farther. You can get a used j-pipe off e-bay for a decent price. The install was very easy for me and if you have basic tools you should be able to do it too.
__________________
"Life begins at 20psi"

97 Eclipse GST-X 5spd
PTE 5031e/pte 880cc/vr4 fuel pump/Devils Own Water injection 12gph nozzle/pre turbo meth injection/fmic 28x10.5x3.5/greddy type-s bov/12" K&N/FP intake/dsmlink/gm 3.3 bar/maft/blitz ebc/act 2600/act 6 puck/SS Clutch line/3" turboback.
Reply With Quote
 
Reply

POST REPLY TO THIS THREAD

Go Back   Automotive Forums Car Chat > Mitsubishi > Eclipse/Talon/Laser > Off-Topic


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 10:26 AM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts