curious for best prices on the net

[YZ125rider21]

hey some you may know i been building a b20 turbo motor i am curious what sites have the best prices for parts out there...i done some search but i dont know whos good on there words...so thats why i am posting this to ask for your help...thanks in advance

[kris]

What are you looking for?

[YZ125rider21]

golden eagle girdle kit, je pistons 9-1 85mm, crower cams turbo spec-springs-retainers for b16 head, vtec oil conversion by golden eagle....stuff like that wondering where be good find best prices

[Ones&zeros]

try jegs or summit racing i dunno

[civickiller]

85mm is alittle big for a turbo motor. the max i would go is 84mm

[YZ125rider21]

uhhhh a b20 is 84mm stock......golden eagle is sleeving my block and boring it to 85mm....you telling me thats to big?

[Kven]

is its resleeved you can go as big as 86mm

try importbuilders.com they also do golden eagle sleeves... for $850 shipped!(b20, the b18c cost $100 less)

[YZ125rider21]

they do there on sleeving now not golden eagle....

[YZ125rider21]

anybody know a good place for a fair deal on a port and polish job on a b16 head?looking into port flow but thats a pretty penny..any other good places?

[civickiller]

if yoru going all motor then go 86mm, i wouldnt recommend anything bigger than 84mm on a turbo motor. sleeves are getting pretty thin after 84mm for the pressures of a turbo. email IB, or GE and ask them what the max bore they recommend for a turbo motor.. then post up how they respond. youll see

[YZ125rider21]

i read about it and they say 85mm at golden eagle

[civickiller]

where do they say that ?

[BullShifter]

Originally Posted by Americanfeagle03

anybody know a good place for a fair deal on a port and polish job on a b16 head?looking into port flow but thats a pretty penny..any other good places?

http://www.mmrusa.com/gudehead.htm

[civickiller]

Originally Posted by Americanfeagle03

anybody know a good place for a fair deal on a port and polish job on a b16 head?looking into port flow but thats a pretty penny..any other good places?

fast-cheap-reliable. choost two

[Kven]

Originally Posted by Americanfeagle03

they do there on sleeving now not golden eagle....

from what i seen they use golden eagle sleeves, but they put it in themselves.