opinions

[Tims_240]

anyone see anything wrong with this intercooler?
im shooting for 350whp but I'm likely to upgrade the intercooler, but this will suffice for now.

http://cgi.ebay.com/ebaymotors/ws/eB...category=33742

[Hit_N_Run-player]

it seems really small. Id shoot for something bigger, and is that a respectable brand?

[AWDSR20]

PIPING? that will cost a gang of $!

i think you might be ok... mine is way larger... but i guess that one is ok...mine is 15inc buy 3 buy 30 sumting, its by Hybrid.

thats my 2cts

[D-Bo]

i think it would work for you but 24" or more would help a ton with air flow.. you'd be much better off with minimum 24".. like awdsr20 said, 30" is good for him on his sr.. somethin like that wouldn't be bad on a ka

[Tims_240]

hmmm, are stock sr20 intercoolers sidemount?

[nissan180]

Originally Posted by Tims_240

hmmm, are stock sr20 intercoolers sidemount?

yes they are sidemounted...in the left fender well. I recommend the Greddy VSPL Front mount intercooler...best cheap intercooler you will find from a credible company. $700 and its big and can handle up to 400hp i believe

[nissanfanatic]

Boooooo. Go with the boostdesigns. Its a bar and plate design and can do 400whp safely. And it fits the bumper no questions asked.

[nissanfanatic]

And guys, its not so much the length or the height that matters, its the thickness of the core. Boostdesigns coolers are the same measurements(24"x6") except the standard comes 2.75" thick and the upgrade is 3.5" thick. And that is the difference between 400whp and 500whp.

[R.W.240]

Originally Posted by nissanfanatic

And guys, its not so much the length or the height that matters, its the thickness of the core. Boostdesigns coolers are the same measurements(24"x6") except the standard comes 2.75" thick and the upgrade is 3.5" thick. And that is the difference between 400whp and 500whp.

Ummm... not quite. A longer or Taller intercooler will always outpreform a thicker one. however longer fins will result in more pressure drop and its that same reason why thick cores are bad - they prevent air from moving as easily across the core.) also what good is air thats already been heated? Temp-differential is what intercoolers are all about. taller coolers are best but packaging constraints keep them from being too square.

[Tims_240]

i know i know, i shouldnt be cheaping out, but i really want to get this thing done so i can be ka-t by mid summer. i could snag an intercooler off of like a mx-6, and reroute the intercooler with rubber hoses, but i havent decided yet, right now i just want it cheap, and i can make it reliable.

[D-Bo]

well if you want some serious temporary intercooling then go find an old volvo turbo..

[R.W.240]

How did you hear about the Jickel cooler?

Theres one thats being passed around the Austin 240 guys right now. A Local used a volvo intercooler and Radiator on his car, now he has a good FMIC but he still runs the Radiator on his 400+HP SR.

[D-Bo]

jickel cooler? sounds funny but i don't know what you mean.. and i got the idea from a buddy with an 89 jetta 2.0T.. used a volvo intercooler and says it runs fine..

[AWDSR20]

piping will be $ dough?? did u consider that?

[Scope240]

ya look at the entire set-up, jsut shop around, the bigger the vooler, the cooler the air, the better the power, as we all know heat is not good for hp.