Ok Here Is More (pics) Of My Civic. Tell Me What You Think.

CBURKE · #1 03-09-2005, 09:11 AM

This is the front, i took the bumper off so when it's time to paint i'm ready.

here is the f'ed up harness, this guy choped it to hell. If any on you know what some of this stuff goes to let me know.

dizzy i think

this is from behind the cluster,

here is some other crap

now i did slap on the skunk2 studs woohoo

here is the port and polish job on the si head.

here is my v-cover woohoo

tell me what you guys think. is this even worth the work it's gonna take me to get is runnin?

1PhatCX · #2 03-09-2005, 11:11 AM

oy, ur harness is fucked!
i'd suggest going to a wrecking yard and pulling one out of another car. save u alot of hassels, and it will be easier to convert to mpfi if u just grab an si harness

CBURKE · #3 03-09-2005, 11:29 AM

That is what i need to know. I found an LX in the yard, can i use that?

turtlecrxsi · #4 03-09-2005, 11:40 AM

Quote:

Originally Posted by 1PhatCX

oy, ur harness is fucked!
i'd suggest going to a wrecking yard and pulling one out of another car. save u alot of hassels, and it will be easier to convert to mpfi if u just grab an si harness

I agree.

Grab an Si or EX harness for mpfi...

1PhatCX · #5 03-09-2005, 11:51 AM

Quote:

Originally Posted by CBURKE

That is what i need to know. I found an LX in the yard, can i use that?

yea but then u'll need to wire it up for mpfi

CBURKE · #6 03-09-2005, 11:55 AM

true, but wont i need some of the DX/LX harness to do the MPFI? as you can see i can't really usr this. i am putting all autmeter gages in it so i don't need the stock speedo but i do wanna use mu fuel. i wounder what he has done. i will not know what works still i am done with the other motor and put it in.

1PhatCX · #7 03-09-2005, 12:01 PM

Quote:

Originally Posted by CBURKE

true, but wont i need some of the DX/LX harness to do the MPFI? as you can see i can't really usr this. i am putting all autmeter gages in it so i don't need the stock speedo but i do wanna use mu fuel. i wounder what he has done. i will not know what works still i am done with the other motor and put it in.

u dont HAVE to use it for mpfi... u can just us an Si or Ex harness, which in turn is a dx harness with the si set-up
it will just keep u from wiring up the mpfi, altho mpfi isnt that hard to do
its ur call for what u wanna do man

CBURKE · #8 03-09-2005, 12:43 PM

Well as far as a know it does not just plug right up. I'll need the end plugs and someother pulgs off the DX harness. And from the looks I don't have meany plugs. It's gonna be hard to find an SI harness out here. When I go to hook up the dizzy will i need to run exstra wires?

civicHBsi91 · #9 03-09-2005, 01:40 PM

Sell it and buy something in better condition.

95cord · #10 03-09-2005, 01:53 PM

good place to start.

CBURKE · #11 03-09-2005, 05:13 PM

Sell it? it only cost me $50.00. The body it self is in very good condition, no rust at all.

DirtyD777 · #12 03-09-2005, 06:08 PM

good lord..looks like you got some work cut out for you.

civicHBsi91 · #13 03-09-2005, 09:57 PM

if you wanna go ahead with that headache...you could find something more stable wiring wise and you could make a profit off of it, you could probably sell the shell for 2-300$

2slowrex · #14 03-09-2005, 10:13 PM

dont listen to them just get a si dash and the underdash harness and engine bay harness so basically the wiring is gonna be si and its gonna look way more profesional. i think i spellt that wrong!lol

crv-tec · #15 03-09-2005, 10:33 PM

Ain't nothing like skunk 2 studs on what appears to be a spare donut... thats just classic...

POST REPLY TO THIS THREAD