|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#2
03-04-2005, 10:59 PM
|
|||
|
|||
|
My 92 S-10 4 x 4 with 4.3 W engine & atuto trans has 3:42 ratio gears.
Don't know which gears are standard. Jerry 
|
|
#3
03-05-2005, 10:48 PM
|
|||
|
|||
|
I have a '91 S10 4WD with 4.3. My gearing is 3.42 and I think the horsepower on the TBI engine is 160 but don't quote me on that. I think the 3.42 gearing is standard with the 235/70/R15 tires.
|
|
#4
03-06-2005, 12:03 AM
|
||||
|
||||
|
Re: Gearing and HP
Quote:
 Look in the glove box (or whereover your RPO codes are), it should tell you what gears it had from the factory.
__________________
'04 Cavalier coupe M/T 2.2 Ecotec Supercharged 14 PSI boost, charge air cooler, 42# injectors Tuned with HP Tuners Poly engine/trans/control arm bushings Self built and self programmed progressive methanol injection system
|
|
#5
03-06-2005, 08:27 AM
|
|||
|
|||
|
The W engine is the Votec fuel injected engine, what is the horse power on it.
Nothing in my Manuel gives horse power. My 92 Blazer S-10- 4 X 4 came with P235/15R Goodyear tires when new. But mine came with the light duty trailer package. The ride is a bit stiff, GVWR is rated at 4,000 to 5,000 thousand pounds. The heaviest thing I have ever had on a trailer behind it is my 3000 Ford tractor, it pulled it with no problem at all. Jerry
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
