Delayed Engine Turnover.

[Turbocpe]

Sorry BlazerLT, if he means he goes and turns the key to start and the starter does nothing, than I agree it is not at all what I'm talking about.

That is not the way I had read it until you made mention of it.

[BlazerLT]

Originally Posted by DjEarth

Well I have a few of those symptoms:

• Backfire during crank/start

• "Kickback" during crank/start

• "No" start

I had the battery..which was still good at the time replaced, with a brand new one, and it still did it..the starter has not been replaced but tested a few times now and the service department at my dealership says it is perfectly good.

Is there any chance you could go get the codes scanned.

[Turbocpe]

DjEarth, if you go to turn the ignition key to START and it does nothing at all, then you need to check your starter like BlazerLT said.

But I will say that the

• Backfire during crank/start

• "Kickback" during crank/start

• "No" start

sound exactly what I'm talking about. Try and find out if the crankshaft sensor was the sensor replaced. Also try to go to Autozone and see if they will check for any stored trouble codes. If they tell you that there won't be any due to no Service Engine Soon light, ask them to check anyway. Not all of the codes will trip a Service Engine Soon light.

Have you had any engine work done before this issue occurred 3 years ago?

[cubanlorenzo]

i had the same problem like 5 months ago. it was a dead spot in the starter. i got a new starter beforemy old was went completly bad, better to get it done now then be stranded not being able to start your truck.

[Turbocpe]

Originally Posted by cubanlorenzo

i had the same problem like 5 months ago. it was a dead spot in the starter. i got a new starter beforemy old was went completly bad, better to get it done now then be stranded not being able to start your truck.

You had engine kick-backs and backfires while trying to start the engine, and replacing the starter fixed that?

[DjEarth]

Hey guys, I have a appointment next week to get scanned for trouble codes as well as a couple other things. I will let you know what the results are. Thank for all the help so far. I was getting pretty stressed over this.