|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
02-15-2005, 12:07 PM
|
|||
|
|||
|
93 Taurus-Replaced Water Pump-Car doesnt start
Hello. I replaced the water pump and the belt tensioner on my 93 Taurus that was originally overheating. I replaced the coolant but DID NOT burp the vehicle. I then drove about 12-14 miles with no problems and the car did not appear to overheat. The car sat overnight and this morning she started up just fine, I backed her out of the spot, put it in park to run back in the house, and when I came back and put her in drive she just stalled and would not start. She just kept turning over but would not start.
Any ideas......?? Paul~ 
|
|
#2
02-15-2005, 06:16 PM
|
|||
|
|||
|
Re: 93 Taurus-Replaced Water Pump-Car doesnt start
What type of engine do you have?
|
|
#3
02-15-2005, 09:13 PM
|
|||
|
|||
|
3.0 not DOHC....
Also, when I got home from work, the car started right up and has run fine since (about 3 miles). However this obviously doesn't mean it won't do it again or solve the original problem..
|
|
#4
02-16-2005, 05:26 PM
|
|||
|
|||
|
Re: 93 Taurus-Replaced Water Pump-Car doesnt start
im not sure then...i was going to say if you had the 3.8 it could be head gaskets
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
