|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
01-27-2005, 08:12 AM
|
|||
|
|||
damn thing wont start
95 c2500 350TBI good ignition, got gass, brand new ignition coil, timing is dead on, possible valves stuck. Any suggestions???
|
|
#3
01-27-2005, 08:40 PM
|
|||
|
|||
|
yeah theres a spark
yeah there is a spark, we were thinking lifters or valves, something up with them. oh by the way this is my frends truck i'm talking about. he was driving it around his farm one day 2 weeks ago and the manifold gasket went. so he changed that but not it wont run.
|
|
#4
01-28-2005, 07:22 AM
|
||||
|
||||
|
Re: damn thing wont start
Okay, I would pull the valve cover(s) off. Look for broken springs, and loose rocker arms.and have someone turn the engine overa little at a time. Observe the valve action to see if you notice any valves returning slower than the others.
__________________
 Yes, I am retarded.
|
|
#5
01-28-2005, 06:51 PM
|
|||
|
|||
|
problem found
My buddy took it all apart and found out that the values were on too tight. He said that the lifters are all bent. He put the valves on too tight and bent the lifters. The rocker arms did not move enough for the lifters and the lifters got compressed inbetween the cam and the rockers. Os now he needs all new lifters and possibly new valves and or rockers. Hopefully just lifters though. He thinks everything else is ok. Thank for your help...
|
|
#6
01-30-2005, 07:47 AM
|
||||
|
||||
|
Re: damn thing wont start
I think he means push rods. They can bend. Lifters wont bend, they may collapse but can sometimes pump back up. Good Luck.
__________________
Yes, I am retarded.
|
|
#7
01-30-2005, 09:08 PM
|
|||
|
|||
|
oops
yeah sorry i ment push rods... oops
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
