help installing european headlights (different power socket)

[theyuw]

I got these european headlights for my 190e (designed for it, they fit as well). The only problem is that the socket that you plug the power into is the wrong type so I can't give them power. Any ideas? Could I possibly install a new plug or socket into the lights? If so let me know where I can get them... Help much appreciated.

[pkmaven]

Euros use a different plug (#006 545 80 28). You must remove the pins which the wires are connect to and insert them into the Euro connector. The pin s are numbered on the new plug: 1=blank, 2=ground Brown, 3=city light(you must run a wire from the corner flasher to this pin and buy the small light bulb #072601-012900 to put in the socket. 4=white/black for left, and white for right light,5=yellow/blck for left and yellow for righ side, 6=gray/green. The high beam/low beam is an H4 bulb, the"fog" light is an H3 bulb clear. You can use 80/100 bulbs withought relays. If you use higher wattage you must add relay circuits.
New pins to solder the existing wires into #003 545 26 26. If you plan to use headlight wipers, post and I will supply all the part numbers. P.